Carson City, Nevada – March 15, 2023 (Newsfile Corp.) (Investorideas.com Newswire) ACME Lithium Inc. (CSE: ACME) (OTCQX: ACLHF) (the “Company”, or “ACME”) is pleased to report that DH-1A has successfully reached a total depth of 1940 feet or 591 meters as part of a Phase 2 drill program at ACME’s Clayton Valley Nevada lithium brine project.
Prospective basin sediments have been encountered deep in DH-1A and delineated with high probability to exhibit characteristics of the Lower Gravel Unit (LGU) in Clayton Valley.
The LGU is a permeable, lithium brine enriched, gravel aquifer, overlying bedrock throughout most of Clayton Valley. The core is consistent with the known basin stratigraphy.
ACME’s Clayton Valley Nevada lithium brine project is contiguous to the northwest of Albemarle’s Silver Peak lithium deposit which has been in production since 1966 and is the only lithium producing region in the United States.
Drilling at Clayton Valley, Nevada (Fig. 1)
Following ACME’s Phase 1 Drill Program lithium brine discovery announcement on August 17, 2022, the Company has successfully accomplished drilling of a deeper exploration hole (DH-1A) as part of a Phase 2 multi-hole drill program. The Phase 2 program includes drilling, well installation, well development, and completion of a pumping test from a large diameter Dissolved Mineral Resource Exploration Well (TW-1). The Phase 2 program also includes completion of up to three (3) new Dissolved Mineral Resource Exploration (DMRE) boreholes DH-1A, DH-2, and DH-3, from which zonal isolated packer testing and brine sampling will be completed. Grouted in Vibrating Wire Piezometers will be installed in each of the DMRE boreholes to monitor long terms water levels and aquifer response to pumping. The Phase 2 Program objectives are to examine deeper horizons below the total drilled depth of DH-1, 1400 feet through zonal isolated testing and brine sampling. Objectives are to assess stratigraphy and to assess the potential continuity between the stratigraphic units to include the LGU. Last summer, DH-1 encountered its highest-grade lithium at the bottom of the hole in the LGU. The results of DH-1A should increase the known vertical extent of the LGU at the project.
Based on a gravity survey conducted by Hasbrouck Geophysics Inc., depth to bedrock was roughly estimated to be between 1800 and 2000 feet.
DH-1A encountered the Campito Formation “bedrock” at approximately 1820 feet, which is consistent with gravity survey and results from historic drilling throughout the basin.
The lithology of DH-1A is consistent with that of DH-1. However, DH-1A extends the vertical extent of the LGU to the contact with bedrock. Clay content appears to increase near the contact with the bedrock, however permeable gravels of the LGU appear to dominate from the contact with the lower ash unit, near approximately 1250 feet to a depth of approximately 1630 feet.
Preliminary logging of DH-1A from depth of 1400 to 1640′ was able to confirm the presence of brine.
The Operator, GeoXplor Inc. contracted Harris Drilling Exploration and Associates Inc. and Confluence Water Resources LLC to provide drilling services and support testing.
Open hole geophysical surveys will commence to interpret changes in lithology, chemistry and assess permeability and other material characteristics.
Packer testing will follow to include multi-zonal isolated lithium brine sampling and hydraulic testing.
Sample zones will target stratigraphic features expected to contain brine.
These samples will be sent to an independent lab and analyzed for lithium, boron and other minerals typical of lithium enriched brine systems.
ACME’s expects DH-1A to be completed by the end of March 2023.
Test Well 1 (TW-1) is expected to commence in April 2023.
ACME is well funded by strategic investors and positioned to complete its exploration and development objectives through the near term with the goal of providing a domestic supply of lithium to the U.S. and Canadian markets.
William Feyerabend, Certified Professional Geologist, is a qualified person as defined by NI 43-101, and has supervised the preparation of the scientific and technical information that forms the basis for this news release.
About ACME Lithium Inc.
Led by an experienced team, ACME Lithium is a mineral exploration Company focused on acquiring, exploring, and developing battery metal projects in partnership with leading technology and commodity companies. ACME has acquired or is under option to acquire a 100-per-cent interest in projects located in Clayton Valley and Fish Lake Valley, Esmeralda County Nevada, at Shatford, Birse, and Cat-Euclid Lakes in southeastern Manitoba, and at Bailey Lake in northern Saskatchewan.
On behalf of the Board of Directors
Chief Executive Officer, President, and Director
Telephone: (604) 564-9045
For Investor Inquiries:
Telephone: (416) 881-5154
Neither the CSE nor its regulations service providers accept responsibility for the adequacy or accuracy of this news release. This news release may contain forward-looking information within the meaning of applicable securities laws (“forward-looking statements”). Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur and in this news release include but are not limited to the attributes of, timing for and expected benefits to be derived from exploration, drilling or development at ACME’s project properties. Information inferred from the interpretation of drilling, sampling and other technical results may also be deemed to be forward-looking statements, as it constitutes a prediction of what might be found to be present when and if a project is actually developed. ACME’s project location adjacent to or nearby lithium projects does not guarantee exploration success or that mineral resources or reserves will be defined on ACME’s properties. Exploration, development, and activities conducted by regional companies provide assistance and additional data for exploration work being completed by ACME. These forward-looking statements are subject to a variety of risks and uncertainties which could cause actual events or results to differ materially from those reflected in the forward-looking statements, including, without limitation: risks related to fluctuations in metal prices; uncertainties related to raising sufficient financing to fund the planned work in a timely manner and on acceptable terms; changes in planned work resulting from weather, logistical, technical or other factors; the possibility that results of work will not fulfill expectations and realize the perceived potential of the Company’s properties; risk of accidents, equipment breakdowns and labour disputes or other unanticipated difficulties or interruptions; the possibility of cost overruns or unanticipated expenses in the work program; the risk of environmental contamination or damage resulting from the Company’s operations and other risks and uncertainties. Any forward-looking statement speaks only as of the date it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise.
This news is published on the Investorideas.com Newswire – a global digital news source for investors and business leaders
Disclaimer/Disclosure: Investorideas.com is a digital publisher of third party sourced news, articles and equity research as well as creates original content, including video, interviews and articles. Original content created by investorideas is protected by copyright laws other than syndication rights. Our site does not make recommendations for purchases or sale of stocks, services or products. Nothing on our sites should be construed as an offer or solicitation to buy or sell products or securities. All investing involves risk and possible losses. This site is currently compensated for news publication and distribution, social media and marketing, content creation and more. Disclosure is posted for each compensated news release, content published /created if required but otherwise the news was not compensated for and was published for the sole interest of our readers and followers. Contact management and IR of each company directly regarding specific questions.
More disclaimer info: https://www.investorideas.com/About/Disclaimer.asp Learn more about publishing your news release and our other news services on the Investorideas.com newswire https://www.investorideas.com/News-Upload/ and tickertagstocknews.com